autstat Support

icon
Avatar
Thomas Baier
Moderator
Posts: 221
Dear users,

unfortunately no one so far has volunteered for having a look at the beta version of statconnDCOM 3.6-0B4. We are making this software available free of charge and we have planned to release this software version just to enable you doing whatever you do with it.

This software version is not available to users of the Professional or Server version of statconnDCOM.

Release of statconnDCOM 3.6-0B4 H&S will be delayed until we have got enough test reports on the beta version. Sorry, but we will not release to the public until QA has been finished.

Unfortunately we are not able to do final testing on the changes ourselves, otherwise we would not ask.

Best regards,
Thomas Baier
2017-02-19 07:26
Avatar
juanjosefernandez19
Posts: 5
Good morning Thomas

Thanks very much for your efforts to release a new version and help all users

I would volunteer, however I am not very skilled with the installations. If you guide me step by step I dont have any problems with testing it.

Thanks very much

Best regards
Juanjo
2017-02-20 07:40
Avatar
Thomas Baier
Moderator
Posts: 221
Dear Juanjo,

if you have managed to install the previous version of statconnDCOM then you should not have problems with the current one.

Please send a message to info AT autstat.com to get a download link.

Thanks,
Thomas
2017-02-20 09:51
Avatar
dirienzo.julio
Posts: 5
From where, the StatconnDCOM beta version can be donwloaded?
2017-02-20 14:01
Avatar
Thomas Baier
Moderator
Posts: 221
Read the postings!
Read the postings!
Read the postings!
Read the postings!
Read the postings!
Read the postings!
Read the postings!
Read the postings!
Read the postings!
Read the postings!
Read the postings!
Read the postings!
Read the postings!
Read the postings!
Read the postings!
Read the postings!
Read the postings!
Read the postings!
Read the postings!
Read the postings!
Read the postings!
Read the postings!
Read the postings!
Read the postings!
Read the postings!
Read the postings!
Read the postings!
Read the postings!
Read the postings!
Read the postings!
Read the postings!
Read the postings!
Read the postings!
Read the postings!
Read the postings!
Read the postings!
Read the postings!
Read the postings!
2017-02-20 17:24
Avatar
msemenoff
Posts: 4
Dear Thomas,
I'd like to beta test by trying an REXEL install with R3.32, Excel 2016, and Windows 10.
Michael
2017-02-20 17:41
Avatar
Thomas Baier
Moderator
Posts: 221
Please send a message to info AT autstat.com
2017-02-20 19:28
Avatar
Thomas Baier
Moderator
Posts: 221
The downloads for the beta testers are available. If anyone is still interested, send an e-mail message. Please keep in mind, you have to be registered for the forum to be able to download the software.

Q: What is expected from the Beta testers?
A: nothing special, just install the software and do what you normally do with statconnDCOM.

Q: How do I report bugs?
A: For the time being, please send a message with a good description to info AT autstat.com

Q: When does the beta testing end?
A: Please just run the software as you would normally do. You should send a short test report by Saturday, Feb. 25.

Q: What should the test report contain?
A: Data about your computer (operating system, R version, Excel version if applicable), references to found (and already reported) bugs, general comments. No special form required. Please use English or German language.

Thanks
2017-02-20 19:54
Avatar
Thomas Baier
Moderator
Posts: 221
We got a few volunteers for having a look at the beta version and I'd like to tell you that I am really disappointed:

  1. more than 15.000 downloads and just 6 people want to have a look at the Home&Student version (not the commercial software)
  2. only two of the beta testers provided feedback


Nevertheless the software is available for download. You are strongly advised to read the remarks on licensing and the software before downloading and installing!

To those testers who provided feedback: thank you!
2017-02-28 08:08
Avatar
thibault.marcaillou
Posts: 8
Hi Thomas,

It seems that I carry on getting the message 'There seems to be no R process connected to Excel' with the beta version.

My setup is as follows:

(a) Win7 64bit version
(b) Excel 2010 32bit version
(c) R3.3.2 32bit version
(d) R-Studio 1.0.136 version
(e) R-Excel 3.2.16 (H&S)

Also I have tried using the 'Server 01 - Basic Test' utility to test the R setup and getting Run-time error (Automation error. The remote procedure call failed) #'-2147023170 (800706be)'.

I have removed and re-installed all of the above components but unfortunately I hadn't had much luck. My setup is all local.

Has anyone else seen issues with this version?

Many thanks

PS: Also I have restarted my pc following each installation.
2017-03-01 14:19
Avatar
nkcsyuan
Posts: 4
Dear Thomas,

Thank you for releasing a new version of StatconnDCOM.
When I use the simple.exe in the beta version to connect R,There is an error:
Run-time error '462',the remote server machine dose not exist or is unavailable.

When I use the MATLAB_RLINK to connect R with the beta version,There is an error:
Error using COM.StatConnectorSrv_StatConnector/Init
Error: Object returned error code: 0x80040013.

My setup is all local,including:
1)Win10 64bit version
2)statconnDCOM3.6-0B4Beta_HomeStudent.exe
3)R3.3.2 32&64bit version
Has anyone encountered this problem´╝čplease contact me.

Thank you very much

Best Wishes
GuoYuan Sun
2017-03-01 15:31
Avatar
Thomas Baier
Moderator
Posts: 221
Please start a new topic and post the required debugging information. Reading the documentation might help, too.
2017-03-01 17:50
icon